Gear4 HouseParty Portable Wireless PG532 Notice D'utilisation page 6

To pair your iPod touch, iPhone
or iPad with the speaker:
■ On your iPod touch / iPhone / iPad, go to
Settings > General > Bluetooth.
■ Turn Bluetooth ON.
■ Press and hold the Bluetooth button on the
speaker ( ) until the Bluetooth icon flashes
quickly and an audio tone is played (about 6
seconds). This indicates the speaker has
entered pairing mode.
■ "HouseParty Portable" will appear under
devices within the Bluetooth menu. Select
this to pair.
■ Your iPod touch / iPhone / iPad will then pair
with the speaker after several seconds.
■ To pair any additional devices, please follow
the above process again.
Connecting your paired
iPod touch / iPhone / iPad
to the speaker:
■ When the speaker is switched on, it will
automatically connect to the last paired or
docked device.
■ If connection to that device is not made, you
can manually connect another paired device.
■ On your iPod touch / iPhone / iPad, go to
Settings > General > Bluetooth.
■ Tap on 'HouseParty Portable'. The
Bluetooth connection between the speaker
and chosen device will now be made.
Note: Only one device can be connected to the
speaker at any given time.
Switching connected devices:
■ To switch the connection with another paired
device, dock your chosen device onto the
speaker and undock. Your chosen device
will now be automatically connected to
the speaker.
■ To switch the connection manually, short
press the Bluetooth button ( ) on the speaker.
This will drop the connection to any
connected device.
■ On your iPod touch / iPhone / iPad, go to
Settings > General > Bluetooth.
■ Tap on 'HouseParty Portable'. The
Bluetooth connection between the speaker
and chosen device will now be made.
■ If no connection is made within 30 seconds of
the Bluetooth button ( ) being pressed, the
speaker will automatically connect to the last
paired or docked device.
Note: Connections between speaker and
devices are only possible if devices have
previously been paired.
GEAR4 / HouseParty Portable Wireless / User Manual 3