Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
nOTE: No alignment of blade with drive pin is required and
operation of the blade cover release button is not required
when re-fitting the blade cover.
Fig. C
3
Fig. D
Fig. E
OPERATION
WARNING: To reduce the risk of serious
personal injury, turn unit off before making any
adjustments or removing/installing attachments
or accessories. An accidental start-up can
cause injury.
Proper Hand Position
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the
main handle.
CAUTION: Blades coast after turn off.
Switching on
•
Push and hold the lock button
to the left and then squeeze the on/off switch
•
Release the lock-off button. (Fig. F)
Switching off
•
Release the on/off switch
WARNING: Never attempt to lock the switch in the
on position.
8
6
6
1
2
(Fig. E) to the right or
1
.
1
.
Fig. F
Hints for optimum use (Figs. G–J)
Trimming Grass
CAUTION: Blades coast after turn off.
•
In order to achieve optimum cutting results, only cut
dry grass.
•
Hold the tool as shown in fig. G & H. Keep your
other hand well away from the blade. Maintain a
stable working position so that you do not slip. Do
not overreach.
•
When cutting long grass, work in stages from the top.
Take small cuts.
•
Keep the tool away from hard objects and
delicate plants.
•
If the tool starts running slowly, reduce the load.
•
To make a closer cut, slightly tilt the tool.
•
Spray the blade with a light coating of general purpose
oil before first use and whenever the blades begin to
look dry.
Fig. G
Fig. H
Trimming Hedges
CAUTION: Blades coast after turn off.
•
Slightly tilt the tool (up to 15° relative to the line of cut)
so that the blade tips point slightly towards the hedge
(Fig. I). This will cause the blades to cut more effectively.
Publicité
Table des Matières
