Ice Ballast Features - Sterilight SQ-PA Instructions D'installation Et Manuel Du Propriétaire

ICE B
ALLAST
The Revised ICE Ballast you have just purchased is an upgraded version of
the original ICE Ballast. This ICE Ballast features an audible lamp
replacement reminder. After one year of lamp operation an alarm will
sound reminding you to replace your UV lamp in order to ensure
optimum UV disinfection levels.
The lamp replacement alarm function can be temporarily disabled for
seven days, by depressing the timer reset SWITCH/LED. After seven days
the alarm will sound again and may be delayed three more times for a
total of 28 days. After the fourth delay the lamp replacement alarm will
sound continuously until the lamp is changed and the alarm timer has
been reset (see below).
R
ESETTING THE
After installing the replacement UV lamp, apply power to the ballast while
holding the reset SWITCH/LED until you hear the three second beep, at
this time release the reset switch. Your timer has now been reset. In
approximately one year the alarm will sound again reminding you to
replace your UV lamp.
A F
DDITIONAL EATURES
• new over-moulded lamp connector
• improved transient protection
• improved surge protection
• improved EMI filtering
• improved alarm circuity to warn of fuse failure
• improved lamp starting
• brownout protection
• conformal coated circuit board to assist with condensation
protection
• Patent US 6,274,988 B1
F :
EATURES
R L
EPLACEMENT
I
NCLUDED IN THE
A T
AMP LARM IMER
ICE B
3
:
:
ALLAST