Know Your Compound Mitre Saw - ShopMaster DELTA Série Manuel D'utilisation

A. Motor
B. Fence
C. Throat Plate
D. Mitre Lock
E. Mitre Control Arm
F. Mitre Gauge with Positive Stops
G. Work Clamp
H. Base with Carry Handles
I. Mounting Holes
J. On-Board Wrench
K. Work Table
L. Bevel Lock
M. Dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P. Saw Head Handle
Q. Spindle Lock
R. Electric Brake (not shown)
S. Laser
T. Power Switch (not shown)
U. Power Safety Toggle

KNOW YOUR COMPOUND MITRE SAW

Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator's manual, as well as
the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety
rules.
A. 15-AMP MOTOR: This tool features a powerful
15-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. FENCE: The mitre fence supports the workpiece when
making all cuts.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITRE LOCK: The mitre lock handle securely locks
the saw at desired mitre angles.
E. MITRE CONTROL ARM: Is mounted to the Work Table
and provides a stable connection in order to pivot the
Work Table at the desired mitre angle.
F. MITRE GAUGE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22-1/2°, 31.6°,
and 45°. The positive stops have been provided on
both the left and right side of the mitre table.
FEATURES
O
J
G
K
I
x4
D
G. WORK CLAMP: The work clamp helps to position
and secure the workpiece to the fence, ensuring safer
operation and more accurate cuts.
H. BASE WITH CARRY HANDLES: Supports the tool
and features mounting holes. Use the carry handles
which are designed into the base for safe and easy
transportation of the saw.
I. MOUNTING HOLES: Enable you to securely mount
the tool to a stable surface.
J. BLADE WRENCH STORAGE: The included blade
wrench features a Phillips screwdriver at one end and
a hex key at the other. Use the hex key when installing
or removing blade and the Phillips screwdriver when
removing or loosening screws. When not in use, the
wrench can be stored in the base of the saw.
K. WORK TABLE: The die-cast aluminum work table
provides a level and sturdy work surface.
L. BEVEL LOCK: The bevel lock secures the saw at the
desired angle for bevel cuts. There are positive stop
screws on each side of the saw arm for making fine
adjustments at 0° and 45°.
M. DUST COLLECTION BAG: The included dust bag
7
N Q U
S
C
F
FIGURE 1
T
P
A
M
L
B
H