Getting Started - auna Streetstar 12 Mode D'emploi

GETTING STARTED

First use / charging the battery
This device is equipped with a with a rechargeable battery. The battery will
be charged automatically as soon as the device is connected to power.
After recharging, the device switches to trickle charging. However, do not
leave the device constantly connected to a socket. Turning off the device via
remote control switches it to standby mode, which consumes more power
than switching it completely off at the panel of the appliance.
ATTENTION: Before first use, fully charge the battery for at least 8 hours.
Only after having charged the battery for 3 times, the battery reaches its
full capacity.
Charge the battery before and after each usage for a lasting battery
performance.
When the device is turned off with the remote control, it is still in standby
mode and uses more power than when you turn the device off completely.
Be sure to fully charge the internal battery of the device before your first
mobile use (without grid power).
Connect the device to an ordinary wall socket via power adapter. The
charging time is about 5-8 hours. The state of charge is indicated by the
LED ("CHARGE") on the back. The LED will got out when the battery is fully
charged.
Bluetooth
1. Set the search function of the Bluetooth unit from which you wish to
play the music.
2. Press the MODE key until AUX is shown in the display. Activate the
Bluetooth function of the media player.
3. Select the Bluetooth device "AUNA" from the list of your device and
make a connection.
If there is a password to be used, enter "0000".
EN
21