Menu Overview - Pentatech Df300 Set Mode D'emploi

11.3 Channel selecting
Tap the camera image to change to full screen view, and again to return to quad
display.
11.4 Manual recording
! When the full image is displayed
Camera Setup [54] "Camera On") / with audio recording) or...

Menu Overview

[44]Connect to internet (only possible after Network connection) ("Charge Only? No Internet" - in this case the cameras
can be viewed via using the App through a local WiFi network)
[43] Choose camera view
• SCAN - Scan mode (all activated camera images are displayed in full screen in sequence with a 5 second interval)
• QUAD - Quad mode (all activated cameras are dislayed together)
• Cam1 / Cam2 / Cam3 / Cam4
[42] Volume - Clock alarm and loudspeaker volume setting
Default setting 6/6
[41] Submenu
[46]
[47]
[48]
, the other 3 channels are deactivated (see
- activated cameras can be individually displayed in full screen
Return to camera image
Playing back recorded video
• Tap Camera symbol "A"
• Tap Camera symbol "1" to "4"
The days with recorded video are highlighted in green
Tap the green highlighted day to show the individual recordings in that day
Tap the desired time to play the video Tap the symbol "X" to delete the video,
recordings from the selected day.
System menu
[54] Camera Setup
• Pairing - Tap the camera chanel number to which a new camera should be paired, within the next 60
seconds press the pairing button [23] on the camera
• Camera On
is indicated by a tick symbol. Tap on the camera symbol to deactivate it, this will be indicated by an "X"
symbol.
• Brightness
brightness is "0".
[56] Recorder Setup
• Motion detection
Off - not activated
Low - motion detection with low sensitivity, detection starts a 2 minute recording
High - motion detection with high sensitivity, detection starts a 2 minute recording
Default: all cameras on "low"
• Email Alert
Email notification activated / deactivated
Enter the requested data before activating this function. When the function is activated and motion is
detected (motion detection must also be activated) then the receiving Email address will be notified with a
message containing camera number and time.
• Schedule Record
0.00-12.00 / PM: 12.00- 24.00 - start and stop must be within the same day). Up to five scheduled recordings
can be set (right hand column 1-5);
when using the quad modus when using more than one camera, more than
one camera is activated (without audio recording): tap the recording symbol
[36], the recording starts and the record symbol flashes.
!
Tap the record symbol again, to stop the recording. Otherwise the recording
will stop automatically after approx 2 minutes.
(Audio from camera microphone only available when in full screen image)
("Record List")
[49] to show recorded video for all cameras in the selected month
[50] to show recorded video for the individual camera in the selected month
- when a camera is added to the system the camera will turn on automatically, this
- Tap the camera symbol to be able to adjust the brightness between -2 and 2. Default
- Select the camera(s), the start and stop times, and the date for the recording (AM:
Default: no scheduled recording
tap the „X " after the file symbol to delete all
GB - 33