Samsung SC12F50 Serie Manuel D'utilisation page 8

operating the cleaner
HOSE (SC12F50P Series)
1. Vacuum cleaner ON/OFF(
- Press the ON/OFF button to operate the vacuum cleaner.
Press again to stop the vacuum cleaner.
2. Vaccum cleaner suction(-/+)
- Press the SUCTION (+/) button to increase or decrease
the suction power. Each time you press the button, you
gradually increase the suction power. After the suction
power reaches its maximum, the next time you press the
button, you return the suction power to its minimum.
3. BRUSH ON/OFF
- Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the Power Brush.
Don't cover the handle transmitter when you use a handle control button.
FCC NOTICE / FCC ID : A3LROH20S
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
BODY
Press the power ON/OFF button repeatedly to start and to
stop the vacuum cleaner. (OFF → ON → OFF)
If the remote handle control is not working, the
cleaner can be operated using the ON/OFF button on
the body of the machine.
 The ON/OFF button operates the vacuum cleanner or stops it.
 The filter light is illuminated when the dust pack requires checking or emptying.
08_ operating the cleaner
)
transmitter
Handle Control
The cleaner is controlled by radio
frequency signals.
1
2