Manual Connection To The Ap; Configuration Menu Of The Dual-Band Wifi Range Extender - SilverCrest SWV 300 B2 Manuel D'utilisation Et Informations Sur Les Services

Manual connection to the AP

For a manual connection to the dual-band wifi range extender (AP), you must
find available wireless networks on your end device. The dual-band wifi range
extender (AP) is displayed under the SSID you specified in the list of available
wireless networks. Then select the corresponding SSID to connect your end
device wirelessly with the dual-band wifi range extender (AP). Then enter the
network key you assigned. For further details, please read the operating
instructions for your end device.
Configuration menu of the dual-band wifi range
extender
You can open the configuration menu of the dual-band wifi range extender on
your computer with an Internet browser. In this configuration menu, you can
make advanced settings of the dual-band wifi range extender, display
information or install a new firmware version.
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings and have
manually set an IP address, you must restore the network
settings to Obtain an IP address automatically. For
further details, please read the operating instructions for your
computer.
SilverCrest SWV 300 B2
English - 173