Rear Panel And Ports - Atlantis PROFESSIONAL WebShare 111 WN Mode D'emploi

LAN
WLAN

1.4 Rear panel and ports

PORT
Ethernet
Power Switch
Power
Reset
Lit when connected to Ethernet device.
Green for 10/100Mbps;
Blinking when data transmit/received.
Flashes when sending/receiving data. Lit green when the
wireless connection is established
Connect an UTP Ethernet cable to one of the four LAN
ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
A Power ON/OFF switch.
Connect the supplied power adapter to this jack.
After the device has turned on, press it to reset the device
or restore to factory default settings. The operation is as
below:
 0-3 seconds: reset the device
 3-5 seconds: no action
 10 seconds or above: restore to factory default
settings (this is used when you can not login to the
router, e.g. forgot the password)
38
MEANING