Changing The Probe; Battery Replacement - Reed R7900 Manuel D'utilisation

Changing the Probe

The degradation and wear of the probe's interlayer plate will influence
measurements. Replace the probe when the following occurs:
1. When measuring different thicknesses, it always displays the
same value
2. When plugging in the probe it has an echo indication or a mea-
sured value displays without measuring

Battery Replacement

1. Turn the meter off
2. Open the battery chamber
3. Take out the batteries, put in new ones taking note of the polarity
4. If the is not to be used for a long time take out the batteries to
avoid leakage and corrosion
534 Blue
123 Yellow
485 Red
123 Yellow
534 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Only if you REALLY need them:
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black -
REED Instruments
20/20/20/100
20
com