Computer Functions; Immediate-Start Function; Exercise With User Setting; User Selection And Setting Of Personal Datas - Hammer CROSSLIFE XTR Notice D'utilisation

5.3 Computer Functions

5.3.1 Immediate-Start function

In order to provide optimum user friendliness of your training equipment, an opportunity for quick and uncomplicated initiation of
training was devised. Please do the following :
• Connect the power supply included in the scope of delivery to the bottom end of the equipment, at the socket provided. A
test image will briefly appear on the computer. After a short time „U0, U1, U2, U3 or U4" will appear in the center of the digital
display.
• Start your exercise by pedalling. You have activated the last used, all values start counting up. After you have finished your
exercise, the reached values will not be safed in the, if you have selected U0!

5.4. Exercise with User setting

5.4.1 User selection and setting of personal datas.

1) USER-Selection
A)
You are in the independant mode. The
already set data
backwards. If the set data reach 0, the
computer will stop and a beep will be
heard. If you didn´t set any values, all data
will start counting up.
→
→
→
→
will start counting
→
→
→
→
The selected User (U0-U4) will
be shown in the display.
or
B)
>3s press: check 2) Setting of personal
<1s press: check 3) Watt Mode
29
→
→
datas