SBS Runway Fit Manuel De L'utilisateur page 5

SAFETY IN CHARGE OF THE BATTERY LITHIUM POLYMER
• The headphones are equipped with non-removable batteries lithium polymer.
• Do not remove the batteries. Do not throw the earphone in fire, batteries may
explode.
• Remove the batteries lithium polymer following the laws for disposal of batteries in
force in your Country.
• Do not follow the advice of use to the use of batteries can result in fire, explosion,
fire, chemical.
• Do not allow battery fluid to come into contact with eyes or skin. In case of contact ,
wash with plenty of water and seek medical advice.
• Do not expose the batteries to lithium polymer at temperatures above 60 °
• Do not disassemble, destroy, because to do short-circuit can cause fire, injury, or
other hazards.
• Charge the phone before using.
• Do not over charge the batteries: may shorten their duration.
• They are guaranteed at least about 300 cycles of charge / discharge.
CONNECT THE TESPORTHEADPHBTY
How to connect a phone
1 Press and hold the MFB (multi function button) for about 8 seconds until the red
and blue LED flash alternately.
2 Activating Bluetooth on the first phone look for the headphone SX-910A: you will
have the associated equipment.
How to connect the second phone.
1 Press and hold the MFB until the headset turns off the LED, then turn off the
phone's Bluetooth 1.
2 Relight headphones.
3 Turn on the Bluetooth on your phone 2: it will start the automatic search of
headphones.
4 The same time re-activate Bluetooth in your phone 1. Click on the previous saved
Bluetooth connection to connect.
HOW TO USE TESPORTHEADPHBTY
Listen to music or make a call
1 Select a song or video.
2 Briefly press the MFB button to start / pause the audio.
3 Quickly press the key search / for tracks forward / backward (I<< / >>I function).
4 Press and hold the volume buttons +/- to adjust the volume.
How to answer an incoming call
Connect the headphones to a smartphone. Press slightly (less than a second) the
MFB to answer the call.
End of call
Press slightly (less than a second) the MFB to end the Call.
Rejecting a call
Press the MFB button for about 2 seconds.
How to connect a phone
Press twice MFB.
5