Assembling The Juicer; Assembling The Juicer Parts - KitchenAid KSM1JA Instructions

ASSEMBLING THE JUICER

Assembling the Juicer_ par_ts
Befor_e Fir_st Use
Before using your Juicer for the first time, wipe Juicer parts with a warm damp cloth,
then wipe clean with a damp cloth. To avoid damaging the juicer, do not wash or
immerse the drive assembly in water or other liquids. Dry with a soft cloth. See "Care
and Cleaning" section.
Pulp
chute
Slide pulp chute out and insert gasket
1
behind chute as shown.
Put the screen wiper basket into
3
the bowl.
Place the auger/blade assembly inside
5
the screen.
Gasket
Place the bowl into the drive assembly.
2
Place the screen of your choice into the
4
screen wiper basket, matching up the
red alignment marks on the screen and
bowl as shown.
Place the lid on the juicer, aligning the
6
unlocked icon on the lid with the red
arrow on the juicing bowl. Rotate lid
clockwise until lid locks into place.
Alignment
mar_ks
7