Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
www.CamOneTec.com
Activation
First screw the included 5.8 GHz antenna to the appropriate thread. Make sure that it is screwed
tightly.
Never operate the transmitter without the 5.8GHz antenna, the module may be damaged!
Do not use other antennas, such as 2.4 GHz antennas.
Plug the supplied 5Pin System Y-Cable into the matching socket on the video transmitter. The power
7.4V 2S – 22.2V 6S)
supply is a LiPo- battery (
with BEC-plug.
The capacity of the battery should be at minimum 1000mAh.
Make sure that the battery will not be totally discharged!
The automatic shut-off at low voltage is not automatically done!
Please be sure that this transmitter and the receiver you are using are working on the same channel
and video band.
Do not install the transmitter hermetically. Make sure that the module has sufficient airflow because it
is getting warm during operation.
12
Publicité
Table des Matières
