Content Of The Box - CamOneTec FCHD91 Mode D'emploi

Content of the box

Please check the completeness before you use the product!
1x 5.8 GHz Video Transmitter
1x 5.8 GHZ Antenna
1x 5Pin System Y-Cable on BEC-AV and BEC-Power
1x Video-In BEC/JST-Cable for power supply (DC-Cable)
1x Video-In USB-Cable for CamOne cameras
1x Video-In USB-Cable for GoPro cameras
1x Manual
LiPo-Battery
The FlyCamOne HD 5.8 GHz Transmitter is the best solution that combines your FPV- live picture with
The high developed systems electronics delivers the best available live picture with 5.8GHz frequency
-
-
-
Optimized 5.8 GHz video transmission with 25mW
24 Channels available (5.8 GHz A/B/F-Band – check technical details!)
Possible video signals: NTSC, PAL, or SECAM
In some EU countries, the use of FPV systems combined with controlling a model aircraft is not
permitted. Make sure that the available frequencies are allowed in the area where you will use the
product!
Use this system with 2 pilots:
One pilot flying the model and another one that will take care of video transmission.
www.CamOneTec.com
!!Please note that no receiver module is included!!
Following parts are required for further use:
(7.4V 2S – 22.2V 6S)
CamOne HD Video Transmitter 5.8 GHz
a professional 5.8GHz receiver module.
which can be displayed on your screen or video goggles.
Recommendation
with BEC-plug for connecting the DC- Cable
Features
Legal Advice
11