weasy SIL85 Manuel D'instructions page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
finished sealing, the blue indicator led is off.
*Notes: The vacuum sealing time is about 2 minutes.
Always turn the Releasing valve to release the air and press both lid lock release button to
open the lid
Stop function:
Stop the machine when vacuum sealing or sealing by pressing the button "Vacuum seal" or 'Seal'
for any emergency.
Note:
1. The vacuum sealer is not suitable for vacuuming liquid food.
2. The maximum width of the vacuum bag/pouch is 30cm(300mm)
3. Please use the vacuum sealing bags or bags with folded sides or bags with lines for vacuuming,
the normal bags or bags with no lines no folded side can be sealed, but it can't be vacuumed
properly.
4. Vacuum sealing your food extends shelf life of your food significantly. However, food will
eventually spoil and rot.
Extra vacuuming function for big size vacuuming bag or vacuuming canisters.
1. Vacuuming function for big size vacuuming bag.
a. Prepare appropriate big size vacuuming bag and put item into the bag, close the open end of
bag, make sure the bag is fully closed and air can't enter the bag.
b. Take out accessories vacuum hose, insert the sharp end into the air suction hole, the end with
round screw thread (screw thread diameter 21. 8mm) be connected with air outlet on the bag, make
sure it is well connected.
c. Close both sides of the lid until you hear a click (follow the advice sticker to close lid).
d. Connect the power supply and press vacuum seal button twice to begin vacuuming process.
The blue indicator led is on, vacuuming will stop automatically when it is finished, . the blue
indicator led is off.
2. Vacuuming function for vacuuming canisters.
a. Prepare appropriate size vacuuming canister and put items into it, close the lip of canister and
turn the knob on the canister into seal, make sure the canister is fully closed and air can't enter into
it.
b. Take out accessories vacuum hose, insert the sharp end into the air suction hole, remove the
end with round screw thread, another sharp end will be available ( sharp end diameter 5. 2mm) and
can be inserted into the air suction hole on the canister, make sure it is well inserted.
c, Close both sides of the lid until you hear a click (follow the advice sticker to close lid).
d, Connect the power supply and press vacuum seal button twice to begin vacuuming process.
The blue indicator led is on, vacuuming will stop automatically when it is finished, . the blue

Publicité

Table des Matières
loading

Produits Connexes pour weasy SIL85

Table des Matières