Assembly And Operation; Applications; Removal And Installation Method Of Battery; Charging - Hitachi Koki R 18DL Manuel D'instructions

English

ASSEMBLY AND OPERATION

APPLICATIONS

Light-duty vacuuming of dry surfaces
REMOVAL AND INSTALLATION
METHOD OF BATTERY
How to install the battery.
Align the battery with the groove in cleaner
handle and slip it into place.
Always insert it all the way until it locks in
place with a little click, If not, it may
accidentally fall out of the cleaner, causing
injury to you or someone around you (Fig. 2).
How to remove the battery.
Withdraw battery from the cleaner handle
while pressing the latch (2 pcs) of the battery
(Fig. 2).
Handle
<R18DL>
Handle
Latch
<R18DSL>

CHARGING

For rechargeable batteries, please charge in
according to the handling instructions of the
charger which you are using.
10
Battery
(Optional accessory)
Push
Latch
Pull out
Insert
Push
Pull out
Insert
Battery
(Optional accessory)
Fig. 2

BEFORE USE

1. Setting up and checking the work
environment
Check if the work environment is suitable by
following the precautions.
2. Mounting and dismounting the guard and
filter
Before using the appliance, check that the
filter is securely mounted. (Fig. 3)
Guard
Filter
Release button
Dust case
Ribs (6pcs.)
(1) Mounting
1 Match the outside diameter of the filter
to the inside diameter of the guard and
insert as far as the filter ring will go.
2 Match the shape of the guard (with the
filter attached) to the shape of the hole
in the dust case and insert as far as it will
go (6 points).
(2) Dismounting
To dismount the guard and the filter, follow
the above procedures in reverse.
3. Attaching and removing the suction opening
Insert the suction opening into the suction
port of the appliance as required. (Fig. 4)
Knob
Knob
Guard
Filter
Knob
Fig. 3