Authorized Service - LGB 65000 Instructions De Service

When programming with newer
55015P Universal Remotes ("parallel"
with "C" programming mode) or
55045 MTS
Programming Modules, all function
values are programmed directly.
Programming procedure with older
55015 Universal Remotes
("P" programming mode):
- Registers CV1 through CV4 can be
programmed directly by program-
ming the desired function value in
the register.
- To program higher CVs:
- In register CV6, input the number
of the register you want to pro-
gram.
- Then input the desired function
value in register CV5.
Example:
Set hand-over function to ON (pro-
gram register CV54 to function value
3).
To program:
- Display shows "P --"
- Select register CV6 (press 6).
- Input 54 (register you want to
program).
- Execute programming (press right
arrow button).
- Display shows "P --"
- Select register CV5 (press 5).
- Input 3 (selected function value)
- Execute programming (press right
arrow button).

AUTHORIZED SERVICE

Improper service will void your warranty.
For quality service, contact your author-
ized retailer or the LGB factory service
station:
Gebr. Märklin & Cie. GmbH
LGB Service-Abteilung
Witschelstraße 104
90431 Nürnberg
Deutschland
Telephone: +49 (911) 83707-38
Telefax: +49 (911) 83707 818
PC Decoder
CAUTION! This model is not for children
under 8 years of age. This model has
small parts, sharp parts and moving
parts. Save the supplied packaging and
instructions.
Products, specifications and avail-
ability dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
Märklin logotype Gebr. Märklin & Cie.
GmbH. Other trademarks are the
property of
© Gebr. Märklin & Cie. GmbH
their owners.
15