Datacom TDT-136 Notice D'utilisation page 63

16:9PB(PillarBox)/16:9 AUTO: Typically for wide screen 16:9 TV.
2.2.2.2 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program
content. This setting should be matched with user's TV.
2.2.2.3 OSD Transparency
Set the On Screen Display transparency. 1 is the most transparent.
2.2.2.4 Banner Display Time
Set Banner displays time. Banner doesn't disappear when set as
disappears at timeout when set as other values.
2.2.2.5 Video Output
Set the video output mode to TV.
2.2.2.6 Video Enhancement
Set the Video Enhancement. See Figure 4.
(1) Press <Up/Down> button to select Video Enhancement option.
(2) Press <Left/Right> button to set Video Enhancement.
(3) Press <Up/Down> button to select Flesh Tone or Black/White Expansion.
(4) Press <Left/Right> button to set Flesh Tone and Black/White Expansion.
2.2.3 Password
Set password for menu lock or channel lock or censorship lock. And the user can
change password here, the default PIN Code is 6666.
2.2.3.1 Menu Lock
Lock the menus by password.
2.2.3.2 Channel Lock
Lock the channel which has been set to lock status when turning on the Channel
Lock. Please see section 2.3.1.2 for details.
2.2.3.3 Censorship Lock
Lock the program by password and censorship threshold.
The censorship info is in program content. Under the censorship rating, user has to
enter the right password for watching program.
Flesh Tone
Black/White Expansion
Move Switch
Figure 4. Video Enhancement
8
Always
OFF
OFF
Exit
and