Power - Peavey Architectural Acoustics PZS 140RA Mode D'emploi

Use only 250V, F4AL single use
fuses. Using any other type of
fuse is a safety hazard and may
cause damage to the equipment.
Use of improper fuse will void your
warranty.
Use only the supplied IEC power
cable or an equivalent of equal
size, length and rating. Using an
improper power cable may cause
damage to the equipment and
could void your warranty.

Power

POWER - Two-position rocker switch enables mains AC power to the
unit. When the switch is in the ON position, the front panel POWER LED
will illuminate, indicating that the PZS
FUSE - Recessed receptacle houses main AC fuse. Fuse is a 250 Volt,
F4AL type single use fuse.
IEC CONNECTOR - Male IEC power connector for connecting supplied
IEC power cable.
FAN - The PZS 140RA is forced air-cooled and features a rear panel
intake fan. Do not block the fan or the exhaust vents.
P Z S ™ -140RA User Manual
R e a r P a n e l F e a t u r e s
™ 140RA is powered ON.
P A G E 1 1