Publicité
User Manual
Introduction
Thank you for purchasing from the Lindy HDMI 18G Splitter range. This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy HDMI 2.0 18G Splitter range are compact, high quality solutions for distributing HDMI 2.0 18G
signals across multiple displays from one source device. With support for resolutions up to 4K 60Hz 4:4:4
8bit, this splitter is great for creating eye-catching digital signage in retail scenarios, showing high quality
video in different rooms in medical facilities or ensuring audiences do not miss any of the action in multi
display sports bars.
Package Contents
▪
HDMI 2.0 18G Splitter
▪
12V DC 1A Multi-Country PSU (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm, Screw Type DC Jack
▪
This Manual
Specification
▪
Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit
▪
Supports High-dynamic range
▪
Metal Housing
▪
Operating Temperature:
▪
Storage Temperature: -20°C - 60°C (-4°F - 140°F)
▪
Humidity: 20 - 90% RH (Non-condensing)
Installation
Please ensure all devices are switched off before connecting any source devices or displays. Once all
connections are made please switch on the devices in the following order: Displays, HDMI Splitter,
Source Device.
Connect a source device to the Input port of the HDMI splitter, then connect displays to the HDMI output
ports. Once all connections are made please connect the power supply and power on the splitter.
Operation
Power LED: This LED will illuminate blue when power is supplied to the splitter.
IN LED: This LED will illuminate blue when a source device is connected to the splitter
OUT LED: These LEDs will illuminate and indicate which HDMI output is connected to an active display
EDID COPY: When switched to COPY, the splitter will read and apply the EDID of the display connected
to HDMI Output 1, and send this EDID to all other outputs. If no display is connected to Output 1, the
splitter will take the next active Output ports EDID
EDID AUTO: When switched to AUTO, the splitter will apply the most suitable signal for all connected
displays.
HDMI IN: Connect a HDMI source device to the HDMI In port of the splitter.
HDMI OUT: Connect each HDMI display to each HDMI Out port of the splitter.
-1
0°C - 50°C (14°F - 122°F)
English
Publicité
