Troubleshooting - Technoflex RABBIT 25 Manuel D'instructions/Liste De Pièces De Rechange

1B
OPERATION
1.14

Troubleshooting

SYMPTOM
Motor does not start
The motor operates well, but
it warm.
The motor upon revolving
makes noise.
The motor operates slowers
of the normal and it warm.
1B-11
PROBABLE CAUSE
1.- No power in the line.
2.- Problem in the switch.
3.- Finished brushes
1.- Grid passes obstructed air.
2.- Defect in the transmission
or vibrant needle.
1.- Faulty bearings.
2.- The rotor scraps.
1.- Bearings blocked in the
needle vibrant or in the
motor.
2.- It lower tension in the line.
COUNTERMEASURE
1.- Checking.
2.- Replace.
3.- Replace.
1.- Cleaning.
2.- Checking if it is the cause
and repair.
1.- Replace.
2.- Bearings replace.
1.- Checking the place of the
mishap and
bearings.
2.- Checking the
tension, the lenght and
section produce a gotten
off tension and danger of
blaze.
replace
external
INGLÉS