Assembly Instructions; Use Of Extension Cords - Technoflex RABBIT 25 Manuel D'instructions/Liste De Pièces De Rechange

Vibrateur interne
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.7

Assembly Instructions

Transmission Assembly: To assemble the flexible
transmission to the motor, press the locking button
down completely, then the transmission coupling is
introduced into the coupling of the engine, making the
two planes of the terminal cable coincide with the
coupling lug, and introduce softly until the locking
button coincides with the safety housing of the engine.
If it drags DO NOT FORCE, make the engine turn
slightly to ease the introduction and perfect coupling.
(See Fig.: 1.7-1)
Starting of the electric motor:
Before starting the electric motor, it will be checked that the network voltage coincides with the that
indicated on the characteristics plate, it will also be verified if the current collection is the same as that
of the motor.
Starting of the petrol engines for the first use:
A) For measuring of security in the transport of shipment, all the machines are given without
oil and without fuel in the motors.
B) Fuel: Filling the tank of fuel, all the petrol engine of the RABBIT Vibrator, it use gasoline for
automobile that is clean, of 95 unleaded octanes.
C) Oil: Filling the tank of oil of the motor, following the instructions of respective lubrication of the
maker of the motor that are attached to this manual.
With temperatures below 3° C., the vibrator may pres ent difficulties to start after a long period stopped,
this is due to the solidifying of the grease bearings and of the shaft, it must start letting the vibrator run
light long enough for normal vibration to be achieved.
1.8

Use of Extension Cords

The extension cords are often required on jobsites to connect the motor. When choosing an extension
cord make sure it has adequate wire size for safety. An undersized cord will cause a drop in line
voltage resulting in a loss of power and overheating. In the Table 1.8-1 It shows the correct wire size
to use depending on cord length. If in doubt, use the next havier cord size.
On motors being used outdoors, use extension cords rated for outdoor use.
INGLÉS
OPERATION
Fig.: 1.7-1
1B
1B-6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rabbit 38Rabbit 48Rabbit 60

Table des Matières