Overview - Autopilot HYDROFARM ECLIPSE F60 Mode D'emploi

Thank you for purchasing the Autopilot ECLIPSE F60 (55APE4100) Digital Environmental Controller
The ECLIPSE F60 offers integrated digital command of critical grow room conditions Autopilot takes
full atmospheric control and lets you get back to growing The F60 precisely controls temperature,
humidity and any device requiring a timed on/off function Its three large LED displays make
monitoring and adjusting these environmental conditions a breeze Three screens continuously
display current temperature, humidity and the cycle timer countdown Its LED lights indicate active
modes and inform the user of any errors The Eclipse F60 Digital Environmental Controller is easy to
program and operate while showcasing total transparency of environmental conditions 24 hours a
day
The ECLIPSE F60's enclosure features three separate power outlets for external control of cooling
(AC or exhaust fan), heating, humidity (humidifier or dehumidifier) and a fourth outlet equipped
with a digital cycle timer that controls any device requiring a timed on/off function such as water
pumps, exhaust fans or CO
atmospheric moisture from entering the device through any unused outlets Rubber feet have also
been added to the back of the unit for added protection when mounted
This controller's sensitive and intelligent remote combination probe is armed with a photocell for
day/night detection and measures temperature and relative humidity levels The probe can be
placed up to 15 feet from the controller, and has been designed to resist EMI/EFI from electronic
ballasts The controller itself comes equipped with wall anchors and optional U-brackets for tent
mounting
User-friendly push button functions are identified on three large LED screens that continuous
display cycle timing, temperature, and relative humidity for complete transparency of atmospheric
conditions A built-in data logger records minimum and maximum temperature and humidity levels
For information on additional Autopilot products please visit AutopilotControllerscom
NOTE: After turning on the power to the unit, it will take five minutes for the sensor to warm up.
NOTE: This controller has a 14.5A maximum load. For higher amperage devices such as A/C units, it is
recommended to use a power expander.
Phillips
Screwdriver

OVERVIEW

devices These outlets feature heavy duty protective covers that prevent
2
TOOLS NEEDED (FOR OPTIONAL MOUNTING)
8' (2.5 m)
minimum
4