Table Des Matières; Tools Required; Torque Specifications - Warn Industries 81580 Instructions D'installation

Kit de montage de lame pour polaris ranger
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Failure to observe these instructions could lead to minor or moderate injury.
Always take time to fully read and understand the installation and Operations Guide included with this product.
Never operate this product if you are under 16 years of age.
Never operate this product when under the influence of drugs, alcohol or medications.
Table of Contents
I.

Tools Required ................................................... 2

II. Torque Specifications ........................................ 2
III. Parts List ............................................................ 3
IV. Installation ....................................................... 4-6
V. Operation ......................................................... 7-8
VI. Tips/Troubleshooting ......................................... 9
VII. Maintenance/Care .............................................. 9
I. Tools Required
• Ratchet
• Sockets:
13mm,14mm,17mm
• Wrenches:
13mm,14mm,17mm
• Torx:
T25
• Torque Wrench
• Drill bit:
7/16" (early models only)
II. Torque Specifications
Please use the recommended torque specifications
when assembling this product unless otherwise
specified in the instructions.
8mm diameter bolt and nuts:
10mm diameter bolts and nuts 30 ft.lbs (40.7 N-m)
12mm diameter bolts an nuts
WARN® INDUSTRIES
CAUTION
Moving Parts Entanglement Hazard
Read installation and operating instructions thoroughly.
17 ft-lbs (12.5 N-m)
75 ft-lbs (101.7 N-m)
PAGE 2
82702A0

Publicité

Chapitres

Table des Matières
loading

Table des Matières