Initial Setup; Using The Tv Control Stick - Samsung QN65Q9FNAF Guide D'utilisation

04 Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
• Noise may occur temporarily when the TV communicates with mobile devices.
• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.
• To perform initialization by using the SmartThings app, the mobile device must have been connected via Wi-Fi.
• When the pop-up for setup does not appear automatically on the SmartThings app of your mobile device, proceed
with the process after manually adding the TV using Add Device on the dashboard of the SmartThings app.

Using the TV Control Stick

You can use the Control Stick on the bottom of the TV instead of the remote control to control most of the functions of
your TV. While watching TV, you can change the channel by pressing the up and down directional buttons on the Control
Stick or adjust the volume by pressing the left and right directional buttons. Press the
to display the Control menu.
To run an item on the menu, press the directional buttons on the Control Stick to move the focus to the item, and then
press the button on the Control Stick.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
Control menu
: Smart Hub
: Settings
: Return
Control Stick / Remote control sensor
• Press
button: Display the Control menu. / Select or run a
focused item on the menu.
• Press and hold
button: The running function is terminated.
• Up/Down button: Changes the channel.
• Left/Right button: Changes the volume.
The Control Stick is located on the bottom of the TV.
button on the Control Stick
: Source
: Power Off
English - 15