Ricoh SP C440DN Mode D'emploi page 9

Masquer les pouces Voir aussi pour SP C440DN:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• When replacing the Fusing Unit, turn the main power switch off and wait at
least 30 minutes before proceeding with the replacement.
• Do not touch this machine if a lightning strike occurs in the immediate vicin-
ity. Doing so could result in electric shock.
• The following explains the warning messages on the plastic bag used in
this product's packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine
away from babies and small children at all times. Suffocation can result
if polythene materials are brought into contact with the mouth or nose.
• If the machine topples, or if a cover or other part gets broken, you must
turn off its power immediately. After turning off the power, be sure to dis-
connect the power cord plug from the wall outlet. Then contact your service
representative and report the problem. Do not use the machine. Doing so
could result in fire or electric shock.
R CAUTION:
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, take care that the power cord is not damaged
under the machine. Failing to take these precautions could result in fire or
electric shock.
• If you have to move the machine when the optional paper tray unit is at-
tached, do not push on the main unit's top section. Doing so can cause the
optional paper tray unit to detach, possibly resulting in injury.
• The printer weighs approximately 57 kg (126 lb.).
• When moving the printer, hold the handles located on both sides, and then
lift it slowly. Lifting it carelessly or dropping it may cause an injury.
Handling the Machine's Interior
R WARNING:
• Do not remove any covers or screws other than those explicitly mentioned
in this manual. Inside this machine are high voltage components that are
an electric shock hazard. Contact your sales or service representative if
any of the machine's internal components require maintenance, adjust-
ment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks
burns and electric shock.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sp c360 serieSp c361 serie

Table des Matières