Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Handling Power Cords and Power Plugs
R WARNING:
• Do not use any power sources other than those that match the specifica-
tions shown in this manual. Doing so could result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications
shown. Doing so could result in fire or electric shock.
• Do not use multi-socket adaptors. Doing so could result in fire or electric
shock.
• Do not use extension cords. Doing so could result in fire or electric shock.
• Do not use power cords that are damaged, broken, or modified. Also, do not
use power cords that have been trapped under heavy objects, pulled hard, or
bent severely. Doing so could result in fire or electric shock.
• If the power cord is damaged and its inner wires are exposed or broken,
contact your service representative for a replacement. Use of damaged
power cords could result in fire or electric shock.
Be sure to disconnect the plug from the wall outlet at least once a year and
check for the following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
If any of the above conditions exist, do not use the plug and consult your
dealer or service representative. Use of the plug could result in fire or electric
shock.
Be sure to disconnect the power cord from the wall outlet at least once a year
and check for the following:
• The power cord's inner wires are exposed, broken, etc.
• The power cord's coating has a crack or dent.
• When bending the power cord, the power turns off and on.
• Part of the power cord becomes hot.
• The power cord is damaged.
If any of the above conditions exist, do not use the power cord and consult
your dealer or service representative. Use of the power cord could result in
fire or electric shock.
• Touching the prongs of the power cable's plug with anything metallic con-
stitutes a fire and electric shock hazard.
3
Publicité
Table des Matières
