Télécharger Imprimer la page

Publicité

Liens rapides

52.16 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Scheinwerfer
Floodlight
Projecteur
Ø 100
Ø 100
50
50
Gebrauchsanweisung
Anwendung
LED-Flächenscheinwerfer für breitstreuende
Lichtstärkeverteilung.
Scheinwerfer mit Erdspieß, Anschlussleitung
und Schutzkontaktstecker für die
ortsveränderliche Montage.
Leuchtmittel
Leuchten-Anschlussleistung
Bemessungstemperatur
Umgebungstemperatur
Lebensdauerkriterien
Modul-Bezeichnung
Farbtemperatur
Farbwiedergabeindex
Modul-Lichtstrom
Leuchtenlichtstrom 
Leuchten-Lichtausbeute 
Produktbeschreibung
Scheinwerfer besteht aus Kunststoff –
Polyamid, glasfaserverstärkt
Sicherheitsglas mit optischer Struktur
Silikondichtung
Reflektor aus eloxiertem Reinstaluminium
Schwenkbereich -45°/+90°
Werkzeuglose Brennlageneinstellung
Anschlussfertig verdrahtet mit
5 m Anschlussleitung H05RN-F 3 G 1@
und Netzstecker
LED-Modul für Netzspannung
220-230 V y 50/60 Hz
Schutzklasse I
Schutzart IP 65
Staubdicht und Schutz gegen Strahlwasser
Schlagfestigkeit IK07
Schutz gegen mechanische
Schläge < 2 Joule
c  – Konformitätszeichen
Gewicht: 1,2 kg
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
165
165
Instructions for use
Application
LED floodlight for broad spread light
distribution. Floodlight with earthspike,
connecting cable and safety plug for portable
installation.
Lamp
12 W
Luminaire connected wattage
t
= 25 °C
Rated temperature
a
t
= 45 °C
Ambient temperature
a max
50 000 h / L
Service life criteria
70
LED-0607/830
Module designation
3000 K
Colour temperature
R
> 80
Colour rendering index
a
1080 lm
Module luminous flux
904 lm
Luminaire luminous flux 
75,3 lm / W
Luminaire luminous efficiency 
Product description
Floodlight made of glass-fibre
reinforced polyamide
Safety glass with optical structure
Silicone gasket
Reflector made of pure anodised aluminium
Swivel range -45°/+90°
No tools are needed to adjust the
operating position
Factory pre-wired with
5 m connecting cable H05RN-F 3 G 1@
and power plug
LED-Module for mains voltage
220-230 V y 50/60 Hz
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK07
Protection against mechanical
impacts < 2 joule
c  – Conformity mark
Weight: 1.2 kg
Safety indices
The installation and operation of this luminaire
are subject to national safety regulations.
The manufacturer is then discharged from
liability when damage is caused by improper
use or installation.
If any luminaire is subsequently modified, the
persons responsible for the modification shall
be considered as manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
90°
Fiche d'utilisation
Utilisation
Projecteur à LED extensif, à répartition
lumineuse extensive. Projecteur sur piquet,
avec câble de raccordement et fiche pour
installation mobile.
Lampe
12 W
Puissance raccordée d'un luminaire
t
= 25 °C
Température de référence
a
t
= 45 °C
Température d'ambiance
a max
50 000 h / L
Critères relatifs à la durée de vie
70
LED-0607/830
Marquage des modules
3000 K
Température de couleur
R
> 80
Indice de rendu des couleurs
a
1080 lm
Flux lumineux du module
904 lm
Flux lumineux du luminaire 
75,3 lm / W
Rendement lum. d'un luminaire 
Description du produit
Projecteur en matière synthétique résistante -
Polyamide renforcé à la fibre de verre
Verre de sécurité à structure optique
Joint silicone
Réflecteur en aluminium pur anodisé
Inclinaison -45°/+90°
Réglage ne nécessitant pas d'outil
Prêt au raccordement avec 5 m de câble
H05RN-F 3 G 1@ et fiche
Module LED pour tension réseau
220-230 V y 50/60 Hz
Classe de protection I
Degré de protection IP 65
Etanche à la poussière et protégé contre les
jets d'eau
Résistance aux chocs mécaniques IK07
Protection contre les chocs
mécaniques < 2 joules
c  – Sigle de conformité
Poids: 1,2 kg
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
Le fabricant décline toute responsabilité
résultant d'une mise en œuvre ou d'une
installation inappropriée du produit.
Toutes les modifications apportées au luminaire
se feront sous la responsabilité exclusive de
celui qui les effectuera.
84 361
IP 65
45°
12 W
t
= 25 °C
a
t
= 45 °C
a max
50 000 h / L
70
LED-0607/830
3000 K
R
> 80
a
1080 lm
904 lm
75,3 lm / W

Publicité

loading

Sommaire des Matières pour BEGA 84 361

  • Page 1 Leuchte vorgenommen, so gilt derjenige als be considered as manufacturer. celui qui les effectuera. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 2 LED-Modul 3000 K LED-0607/830 LED module 3000 K LED-0607/830 Module LED 3000 K LED-0607/830 Reflektor 761528 Reflector 761528 Réflecteur 761528 Dichtung 831372 Gasket 831372 Joint 831372 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...