Philips Norelco Multigroom 5000 Serie Mode D'emploi page 13

Problem
The appliance does
not work anymore.
The appliance does
not charge when it
is connected to the
mains.
The appliance does
not trim as well as
it used to.
The appliance
becomes hot.
Possible cause
The rechargeable
battery is empty.
The appliance has to
be switched off
when you charge it.
The cutting element
of the attachment
you are using is dirty.
The cutting element
of the attachment
you are using is dirty.
English
Solution
Charge the appliance (see
chapter 'Charging'). Make
sure you switch off the
appliance before you charge
it. During charging, the
battery status indicator on
the appliance flashes. If the
battery status indicator does
not flash, check whether
there is a power failure or if
the wall socket is live. If there
is no power failure and the
wall socket is live but the
battery status indicator still
does not flash, take the
appliance to your dealer or a
Philips service center.
Switch off the appliance.
Remove the attachment
from the appliance. Clean
the attachment under a
lukewarm tap.
Make sure that the appliance
is charged sufficiently.
Remove the attachment
from the appliance. Clean
the attachment under a
lukewarm tap.
13