Safety Precautions - IRIS USA SDR-C1 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY PRECAUTIONS

Prior to use, please read the safety precautions carefully to ensure proper use . The precautions listed here are described under
classification of Warnings and Cautions, and are intended to prevent harm or damages to users and other persons . All of these
precautions are critical in terms of safety . Please follow them at all times .
Graphic Symbol Indications: Indicates content that could lead to death or injury if handled incorrectly .
CAUTION
PROHIBITED
Disassembly prohibited.
Do not disassemble, repair, or modify . Doing so can cause fire, electric shock, or injury .
Repair by persons other than trained repair technicians can be dangerous .
Product use.
Use on a level, stable surface . Placing product on uneven and unstable surfaces can cause the product to fall
over, leading to injury or damage to property in the vicinity of the product .
Always grasp the power plug to unplug it, do not unplug it by pulling on the power cord . Pulling on the power
cord can damage it, which can cause fire or electric shock .
Always unplug the power plug from the electric socket when the product will be unused for extended periods
of time . Failing to do so can lead to fire or electric shock caused by short-circuits due to reduced insulation .
Do not move the machine while in use . Doing so may cause burns .
Please perform cleaning and maintenance after the product has cooled down . Not doing so may cause
burns .
Unplug.
Unplug the power plug from the electric socket when performing maintenance, inspecting, or moving the
product .
This appliance has a polarized plug (one blade is wider than the other) . To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse
the plug . If it still does not fit, contact a qualified electrician . Do not modify the plug in any way .
Grasp the plug and remove from the receptacle or other outlet device . Do not unplug by pulling on the cord .
When removing the power plug from the socket, please ensure that the machine has stopped running . Not
doing so may cause damage to the plug blades or socket, or may cause a fire .
Use power plugs and power cords correctly.
Failing to do so can cause fire or electric shock due to short-circuits .
Insert the power plug securely all the way into the electric socket .
Regularly remove dust from the power plug .
When dust is allowed to build up, insulation is hampered due to moisture, which can cause fire or
electric shock .
Use only 120V AC . Other current/voltage can cause fires .
Do not use if the power cord or the power plug is damaged, or if the power plug is loose when plugged into
the electric socket . Doing so can cause fire or electric shock due to short-circuit .
Do not wind the cord around the product when not in use as this may cause product failure .
Do not damage the power cord.
Damaging, modifying, forcefully bending, pulling, twisting, putting heavy objects, or pinching can damage
the power cord, which can cause fire or electric shock .
Do not use if the power cord is bundled up . Doing so can cause fires . Always extend the cord out
before using .
Do not pull on the power cord when carrying or storing the product . Pulling on the power cord can cause fire
or electric shock .
Do not pull or lift the product by holding the cord . This may cause damage to the cord or fire .
INSTRUCTIONS THAT MUST BE FOLLOWED
1
Abnormalities and malfunctions can cause smoke, fire, or electric shock.
Stop use immediately, cut power, and unplug from the electric socket when abnormalities or malfunctions occur .
Examples of Abnormalities
Abnormal sounds or odors .
Power plug or power cord become abnormally hot .
Loss of power, etc . when power cord is moved .
The product periodically stops during operation .
Tingling sensation from electric current felt when the product is touched .
Stop use and contact IRIS USA, Inc . customer service at 1-800-320-4747
Avoid fire hazards.
Do not spray with insecticides, hair sprays, or lubrication oils, etc .
Do not use near flammable substances (kerosene, gasoline, paint thinner, etc .), objects that have flames
(cigarettes, incense, etc .) or combustible materials . Can cause fires .
Do not block air flow in or out . This may cause the product to overheat and cause a fire .
Do not put any foreign materials such as metal into the product . This may cause the product to overheat and
cause a fire .
Do not use to dry shoes or other items with oil or solvent stains . Oils, dry-cleaning solvents, gasoline,
benzene, paint thinner, or other such chemicals may cause a fire .
Wet hands prohibited.
Do not unplug power plug when hands are wet .
Do not use the product outdoors.
Do not use in rooms with high humidity levels such as bathrooms .
Do not get the unit wet, or put the unit in water . Getting the product wet can cause fire or electric shock .
Do not use in or near environments filled with sooty air . Doing so may cause a fire .
If handled incorrectly, contents can lead to personal injury or physical damage.
Keep out of reach of children and infants .
Do not climb or sit on the product . This may cause injury, machine failure, or damage .
Do not drag the product when moving it . Dragging product can damage carpet and floors .
Be especially mindful not to allow children or elderly people near product . Being near the product can be
harmful to their physical condition and to their health .
Do not point heat flow directly at a person or pet . Doing so may cause burns .
Do not use the product in in a wardrobe or closet while the door is completely closed . This may cause
abnormal heating or product failure .
Do not use to dry dripping shoes . Doing so may cause electric shock .
Do not use on products with low heat resistance such as leather or synthetic leather shoes . This may cause
distortion or deterioration .
Do not use the product on glass such as windows or mirrors . This may cause damage due to the sudden
temperature change .
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dsdr-c1

Table des Matières