AKASO P50 Mode D'emploi page 6

5. 360°PANORAMIC NAVIGATION
1. Creating Panoramic Navigation Picture
Click " → Try now", the camera will automatically rotate and capture 15 pictures from
360°
different directions, then combine these pictures to generate a new panoramic navigation
picture.
My camera
Creating navigtion pictur...
Get a navigation picture:
P50
Online
360°
Note: Do not move or block in the
vision of camera
My camera Album Alert Setting
07
Tr y Now
P50
After generating the navigation picture, click "Play" to enter into the live view interface.
You can tap on any point of the picture and the camera will rotate immediately and point
to that location.
Note:
① After creating a 360° Panoramic image, the Panoramic Navigation Mode cannot turn
off, only delete the camera from APP , add the camera again on APP , it can turn off.
② If you change the location of the camera, you can create a new panoramic navigation
picture as per above setting.
2. Set Shooting Angle via Panoramic Navigation Picture
You can set maximum 3 sets of shooting angles via panoramic navigation picture. Once
set, the camera will automatically rotate to the preset location at preset time.
① Tap on a target point of panoramic navigation picture to rotate the camera to the
location you want.
② Click icon on Live View Interface, a pop-up window appears for setting shooting
angle, select time, click "OK" to finish the setup.
③ Repeat ① and ② to set each shooting angle, max. 3.
Note: Icon will display in panoramic navigation picture after completing shooting angle
setting, means a single preset of a single shooting angle.
P50 P50
08