5-Programming; Basic Programming - SFE 7930-23 Manuel D'utilisation

S F E

5-PROGRAMMING

5.1 Basic programming

The most common operating parameters are set in the basic menu. To access the basic menu, press and
release the
DATA
E
N
G
L
I
S
H
Press to switch parameters.
While the parameters are being edited, the regeneration icon is on and flashing.
button. The basic menu contains the following parameters:
DESCRIPTION
Hour format setting as 12 or 24 hours. Press
this parameter.
Current time. The current time is displayed flashing, together with
the day of the week, fixed. Press
Day of week. The current day is displayed flashing, together with
the current time, fixed. Press
Days enabled for regeneration. The display shows "dx y" where x is
the day of the week (1-7) and y shows whether the selected day is
enabled for regeneration "1" or not, "0". For every enabled day, the
top of the display shows the relevant flashing icon.
Press to edit the setting of the selected day (x),
press to enable or disable the selected day (y).
Regeneration time. Regeneration start time when a delayed time or
cubic metre start is enabled. Press
End of the programming.
or to edit
or to edit.
or to edit.
or to edit.
30
DEFAULT MIN - MAX
24H 12H – 24H
00:00 00:00
23:59
Mo N.A.
All enabled N.A.
2:00 00:00
23:59
N.A. N.A.