Thermostat / Timer (Heater Maximo 2000 Lcd); Eco-Saving Function; Wall Mounting - Sonnenkonig MAXIMO 1000 Mode D'emploi

5.3 Thermostat / Timer (Heater MAXIMO 2000 LCD)

Press the MODE button, the unit turns on and begins to heat up.
There are 3 different modes:
1. LOW
EN
2. HIGH
3. AUTO

5.4 ECO-saving function

When the heater reaches operating temperature, the unit switches to ECO mode feature, the
ECO function display will now begin to glow. In this mode, the heater can save 30% of the heat.
The power consumption in ECO mode are as follows:
Heater MAXIMO 1000...........................................700 Watt
Heater MAXIMO 1500.........................................1000 Watt
Heater MAXIMO 2000 / 2000 LCD..................1300 Watt
Turns off the ECO-function display, the unit will return to normal heating mode.

5.5 Wall mounting

• Use to mount the included wall mounting kit for the heater to the wall.
• Fix the screws and anchors according to requirement. The fixed support for the Fixed installation
is located on the rear panel.
• Then serve the assembled bolts as a support for the device.
Press the MODE button 1x and this mode is activated.
You can in this mode does not adjust the temperature.
The temperature is LOW (low).
Set the timer, you can use the + and - buttons.
Press to confirm the set time , the timer button.
The appliance now heats example for 2 h and then turns off.
Press the MODE button 2x and this mode is activated. You can in this mode
does not adjust the temperature. The temperature is HIGH (high). Set the
timer, you can use the + and - buttons. Press to confirm the set time, the
mer button.The appliance now heats example for 2h and then turns off.
Press the MODE button 3 times and it is in use. You can in this mode, the
temperature with the + and - to adjust. Minimum: 7 degrees centigrade,
maximum: 35 degrees Celsius, the display shows in addition (HIGH) at this
temperature. At 30 degrees Celsius appears on the display in addition
(LOW). Set the timer, you can also switch to + and -.Press to confirm the
set time, the timer button. The appliance now heats example For 2 h and
then turns off.
50