Operation; Commissioning; Thermostaat - Sonnenkonig MAXIMO 1000 Mode D'emploi

Heater MAXIMO 2000 LCD
1 On / off switch
2 Control panel
3 Transport rollers
4 Foot
5 Metal housing
6 Handle
7 Mounting hole
8 Mounting bracket
9/10 Screws
11 Remote

5 Operation

5.1 Commissioning

To use the heater, proceed as follows:
• Plug the power cord to the power circuit.
• Press the power switch to on position.
• Operate the unit then according to the following description.
5.2 Thermostat
You can set the desired temperature by thermostat. Turn the thermostat to the desired value.
The heater is then up to the attainment of the preset value to a maximum operational level.
The thermostat will cause the heater to turn on when the ambient temperature is below the
preset value. If the temperature rises above this value, the thermostat, the unit switches to the
ECO-saving function.
49 49
Display
Display LCD
Mode
Mode
Off
On/Off
Timer
Timer
Off
On/Off
Mode
Mode
Timer
Timer
EN