Technical Specifications - IVT US-12 Mode D'emploi

Connection version 1:
The 230 V AC mains is connected to the AC2 input (higher priority).
I.e. the battery is spared and the inverter is simultaneously protected against external voltage.
Only if there is no current on AC2, AC1 input switches to power supply by means of the inverter.
INVERTER
230 V
DC IN
OUT
BATTERY
230 V AC MAINS
Connection version 2:
The inverter is connected to the AC2 input (higher priority). I.e. power is primarily supplied by the
battery over the inverter (e.g. when using solar stand­alone systems). Only when the inverter switches
off due to deep discharge protection, the device switches to 230 V AC mains using the AC1 input.
230 V AC MAINS
INVERTER
230 V
DC IN
OUT
BATTERY
The Switching Station US-12 must be firmly (e. g. on the wall) attached. The device must
i
only be put into gear after all the connected cables have been firmly attached. While
running the device there must be no open wire ends or disconnected plugs of any kind.
Please ask authorized personnel if in doubt!
8 3 years manufacturer's warranty. Rechargeable batteries excluded.
SWITCHING STATION
LOAD
PE
LOAD
SWITCHING STATION
LOAD
PE
LOAD

TECHNICAL SPECIFICATIONS

Input voltage 230 V AC, 50 Hz
Output voltage 230 V AC, 50 Hz
Current (max.) 12 A
Power (max.) 2,700 VA
Switching time 1 – 2 s
Fuse T 15 A / 250 V
Housing Plastic
IP protection IP 55
Dimensions 120 x 120 x 58 mm
Weight 250 g
Art. no.: 400033
ENVIRONMENTAL PROTECTION NOTE
At the end of its useful life, this product must not be disposed of together with normal
household waste, but has to be dropped off at a collection centre for the recycling of
electrical and electronic devices.
This is indicated by the symbol on the product, on the instruction manual or on the
packaging.
The materials of which this product is made are recyclable pursuant to their labeling.
With the reuse, the recycling of the materials or other forms of scrap usage you are making
an important contribution to the protection of the environment.
Please ask your local administration office for the appropriate disposal center.
Technical specifications subject to change. We assume no liability for typographical errors. V2_05/2020
IVT | Innovative Versorgungstechnik GmbH | Dienhof 14 | D-92242 Hirschau
fon +49 9622 71991-0 | fax +49 9622 71991-20 | www.ivt-hirschau.de | info@ivt-hirschau.de
More information at www.ivt-hirschau.de 9