Quick-Start Demo - Outbound 079-4100-2 Manuel D'utilisation

Q UICK-ST RT DEMONSTR TION
I. Supplies Needed
• A nail
• A pull-tab from a beverage can • A zinc penny (dated after 1982)
II. Position the Detector
a. Place the detector on a
table, with the searchcoil
hanging over the edge (or
better, have a friend hold
the detector, with the coil
off the ground).
b. Keep the searchcoil away
from walls, floors, and
metal objects.
c. Remove watches, rings and other jewellery or metal objects from
hands and wrists.
d. Turn off appliances or lights that cause electromagnetic interference.
e. Pivot searchcoil back toward the
detector body.
III. Power Up
Press the ON touchpad.
The detector will beep twice and
the full sensitivity setting will be
indicated on the left of the display.
IV. Wave each Object over the Searchcoil
a. Notice a different tone for each object.
Low Tone:
Medium Tone: Pull-tab and zinc penny
High Tone:
b. Motion is required. Objects must be in motion over the searchcoil
to be detected.
V. Press the MODE touchpad(*)
The detector will beep twice and
the sensitivity setting will flash
on the left side of the display.
Quick-Start Demo continued on next page
• A quarter
Nail
Quarter
7