Outbound 079-4100-2 Manuel D'utilisation page 17

IN THE FIELD TECHNIQUES
you many have encountered
multiple objects. If you are new
to the hobby, you may want to
dig all targets at first. With
practice in the field, you will
learn to better discern the
nature of buried objects by the
nature of
response.
You may encounter some false
signals as you proceed. False
signals occur when the detector
beeps, but no metal target is
present. False signals can be
induced by electromagnetic
interference,
highly-mineralized
soils. If the detector beeps
once, but does not repeat the
signal with several additional
sweeps over the same spot,
there is probably no target
present.
When searching very trashy
ground, it is best to scan small
areas with slow, short sweeps.
the detector's
oxidation,
ground
You will be surprised just how
much trash metal and foil you
will find in some areas. The
trashiest areas have been
frequented by the most people,
and frequently hold the most
promise for finding the most
lost valuables.
Also maintain the searchcoil
positioned just above the
surface of the ground, without
making
ground. Making contact with
the ground can cause false
signals.
or
contact with the
17