Batteries - Outbound 079-4100-2 Manuel D'utilisation

B TTERIES
Use ALKALINE
batteries only.
To install the

batteries:

1
Remove
battery cover by
disengaging the
clip at the back.
2
Align the polarity
of the batteries
correctly,
the positive "+"
toward the coil
plug connection,
as indicated by
the +
indicators
housing.
3
Insert (2) 9 V ALKALINE batteries, with the contacts pointed inward,
and press down on the back of the batteries to snap them into place.
Some brands of batteries will require moderate force to clear the
retaining tabs.
4
Replace the battery door.
The Low Battery Indicator will come on and stay on if the batteries need
to be replaced.
Most metal detector problems are due to improperly installed batteries,
or the use of non-alkaline or discharged batteries. If the detector does
not turn on, please check the batteries.
6
the
Plug
Connector
with
Battery
Compartment
and –
on the
DO NOT MIX OLD AND NEW BATTERIES
Battery
Compartment
Cover