Installation; Installing The Remote Control; Fitting The Boiler's Radio Module (Package Ad252); Installing The Batteries In The Remote Control - De Dietrich AD253 Notice D'installation, D'utilisation Et D'entretien

AD253 - AD284
2

Installation

2.1

Installing the remote control

1
07/07/2011 - 300020530-001-D
2.1.1.
The boiler radio module is used to establish communication between
the remote control and the boiler.
¼ To install the module, refer to the mounting instructions for the
boiler radio module.
C002449-B
2.1.2.
Install the batteries in the box, respecting the + and - polarities.
2
When the symbol D flashes on the display, replace the batteries.
C002351-C
2.1.3.
Each radio remote control is given a unique identifying number in the
factory, which enables the boiler's radio module to recognise it. The
identifying number is transmitted to the boiler's radio module by the
pairing sequence.
¼ To effect pairing, refer to the mounting instructions for the boiler
radio module.
Fitting the boiler's radio module (Package
AD252)

Installing the batteries in the remote control

CAUTION
Use the batteries provided or commercially available
alkaline batteries LR 6 AA 1.5 V. Do not use rechargeable
batteries.
Pairing the remote control with the boiler
radio module (Package AD252)
2. Installation
EN
37