Energy Savings Management - De Dietrich AD253 Notice D'installation, D'utilisation Et D'entretien

1. Description
EN
1.2

Energy savings management

36
b Selection of the comfort mode period x
Steady symbol: Comfort mode selection active
4
Flashing symbol: Comfort mode selection inactive
4
v
Selection of the reduced mode period Vm
Steady symbol: Reduced mode selection active
4
Flashing symbol: Reduced mode selection inactive
4
Indicator showing the end of override
P
Operation in automatic mode according to the timer
AUTO
programme
Comfort mode: The symbol is displayed when a DAY
x
override (comfort) is activated
Flashing symbol: Temporary override
4
Steady symbol: Permanent override
4
Reduced mode: The symbol is displayed when a NIGHT
m
override (reduced) is activated
Flashing symbol: Temporary override
4
Steady symbol: Permanent override
4
Holiday mode: The symbol is displayed when a HOLIDAY
g
override (antifreeze) is activated
Flashing symbol: Holiday mode programmed
4
Steady symbol: Holiday mode active
4
Cooling mode: The symbol is displayed when a COOLING
w
override is activated in summer
Flashing symbol: Temporary override
4
Steady symbol: Permanent override
4
Summer mode: The heating is off. Domestic hot water
p
continues to be produced
WINTER mode: Heating and domestic hot water working
b
The symbol is displayed when domestic hot water
r
production is available on the installation
Manual mode
m
If no actions are performed for 20 seconds, the remote control goes into
standby (backlight off).
Pressing any key or using the rotary button switches on the backlight.
AD253 - AD284
07/07/2011 - 300020530-001-D