Parameter Adjustment - Alphacool CHILLER 2000 EISZEIT Mode D'emploi

Installation
4
Check the water level
The fi rst startup of the new chiller empties the air in the water tubes,
leading to a small water level decline in the reservoir. Observe the water
level for a period of time and add adequate water if necessary. A rapid
water level drop may be a sign of system leakage.
5
Adjust parameters of the temperature controller
The machine uses an intelligent thermostat. Normally, users should not
need to adjust it. If it becomes necessary to do so, please refer to the
"Parameter adjustment" chapter.
7