Connecting A Gate Opener (Not Included); Replace Call Button; Basic Functions; Unlocking Your Door Or Gate With A Rfid Tag - Byron DIC-24112 Mode D'emploi

F. On the lock: Loosen the 2 terminal screws.
G. Insert the wires (any order)
H. Fasten the terminal screws.

3.3.5 Connecting a gate opener (not included)

It is possible to connect a gate opener to the outdoor unit that can be
opened using the monitor or RFID tag.
To connect the gate opener, you will need the following tool:
ü A small flat head screw driver.
A. On the outdoor unit: Loosen the terminal screws. (see sticker on
the outdoor unit for position)
B. Insert the wires. (see sticker on the outdoor unit for position)
ð It is important that the + and – wires are in the correct position.
A. Fasten the terminal screws.
B. Set type of door opened by the RFID tag by setting switch no 2 on
the doorbell. This will set if the gate or door lock will open when
using the RFID tag.
ð Gate opener (switch in upper position)
ð Door lock (switch in lower position).
A. On the gate opener: (See the manual provided with your gate
opener.)
4

Replace call button

An extra call button is added to the box. This button is marked with a
bell to avoid confusion on where to push.
The original call button (without marking) on the outdoor unit is
replaceable.
You can use the blank button for engraving your name.
5

Basic functions

5.1 UNLOCKING YOUR DOOR OR GATE
WITH A RFID TAG
ü You have connected an electric strike or gate opener to your
doorbell.
ü You have set the gate / lock switch to the correct position for
your situation.
A. To unlock your door or gate, simply swipe your administrator or
user tag across the RFID sensor on your doorbell.
ð Your door or gate will now unlock within the time period you set
using the lock release time switch.
5.2

ANSWERING A CALL

When the doorbell rings, you can:
A. Press the gate button to open the gate (optional).
B. Press the lock button to open the door (optional).
C. Press the camera button to make a video or take a picture.
D. Press the talk button to talk to your visitor.
5.3

REGISTERING RFID TAGS

Note: When using the product for the first time, it is not necessary to
register the administrator tags. The tags have already been
registered in the factory. It is only possible to register 2 administrator
tags at a time.
Instruction manual
EN
9