iMerciv BuzzClip Guide De Démarrage Rapide page 4

Operating your BuzzClip
Turning On your BuzzClip:
Locate the On/Off Button – With the BuzzClip in
your palm, you should be able to feel a circular ring
at the top which is the sensor. To the left of the
sensor, there is a rubberized button indented with a
tactile marking to indicate the On/Off button.
1. Press and hold this button to turn on your BuzzClip. You should then
immediately feel a series of short vibrations followed by two longer
vibrations. The shorter initial vibrations indicate the BuzzClip's battery level:
• 4 vibrations indicate that the battery is above 75%.
• 3 vibrations indicate that the battery is between 50% -75%.
• 2 vibrations indicate that the battery is between 25% -50%.
• 1 vibration indicates that the battery is less than 25%. Charge it soon!
The two longer vibrations that follow are to let you know that the BuzzClip
is ready to go and begin detecting obstacles around you.
2. Your BuzzClip's default starting mode is a one-meter range.