Manual (Man) Mode; Away Mode; Standby Mode - Aube Technologies TH104PLUS Guide Du Propriétaire

Owner's Guide

Manual (Man) mode

To place the thermostat in Manual mode, press the Mode
button until Man appears on the screen. In this mode, any
modification to the temperature setpoint must be done
manually. To set the temperature, press the Up or Down
button. The default setting is 21.0°C (70°F).

Away mode

To place the thermostat in Away mode, press the Mode button
until Away appears on the screen. This mode is a quick way to
lower the temperature to a predetermined setting before you go
away for an extended length of time. The temperature is 15.0°C
(59°F) by default and can be modified using the setup menu
(see page 11).

Standby mode

To disable heating, press the Mode button until Standby
appears on the screen. In this mode, the setpoint temperature
cannot be displayed or modified. For frost protection, heating
will turn on only to prevent the room temperature from dropping
below 5°C (41°F).
10