Built-In Compressor Protection; Adaptive Intelligent Recovery - Honeywell FocusPRO 6000 Série Guide De L'utilisateur

Built-in compressor protection

Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait for
a few minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat On
if you have a heat pump). When the safe
wait time has elapsed, the message
stops flashing and the compressor turns
on.

Adaptive Intelligent Recovery™

Adaptive Intelligent Recovery eliminates guesswork when setting your schedule.
It allows the thermostat to "learn" how long your furnace and air conditioner take
to reach the temperature you want.
Just set your program schedule to the time you want the house to reach your
desired temperature. The thermostat then turns on the heating or cooling at just
the right time to reach your scheduled temperature at your scheduled time.
For example: Set the Wake time to 6 am and the temperature to 70°. The heat
will come on before 6 am, so the temperature is 70° by the time you wake at 6.
Note: When Adaptive Intelligent Recovery is in effect, the thermostat will display
"In Recovery".
Inside
75
Set Clock/Day/
Schedule
Message flashes until safe
restart time has elapsed.
5
Cool
Setting
75
6 : 30
AM
Cool On
Fan System
Auto Cool
MCR29466