Haas+Sohn Pelletto III Fiche Technique page 46

!
Please observe the following instructions:
Quality of wood pellets:
Depending on the manufacturer there are light, dark, shorter and longer pellets. And the quality of one delivery may
differ from another even from the same supplier. The standards for wood pellets are becoming more and more strict
but wood is wood and has its own characteristics regarding ash and clinker.
Cleaning requirements:
As soon as you find ash and clinker deposits in the cold combustion pot, it must be cleaned. See operating
instructions! If this is not done, there will be more and more clinker. Then the device will no longer be able to ignite
properly. Pellets may pile up in the combustion pot. In extreme cases, this can reach all the way back to the pellet
chute. Backfire in the pellet container and smouldering in the pellet tank might possibly result. This will destroy
your device and is not covered by the guarantee.
For maximum working life:

Arrange for commissioning by your trained stove supplier.

Observe the daily check as described and more frequently if you have received new pellet deliveries or when
the device is brought back into use after the summer.

Carefully read through all the operating instructions and retain them.
Type number:
Important manufacturer's instructions
Equipment sheet - Pellett Stove
Art. no. 0541908101400
V16 B15
Pelletto III
419.08 / 434.08
!