Kenwood CR-ST50DAB Notice D'emploi page 22

10. Maintenance
– Never attempt to carry out the maintenance of this device yourself, because live parts can be
exposed through the openings or by removing covers, contacting which can be hazardous. Leave all
maintenance to qualified service personnel.
11. Damage requiring repair
– Maintenance and repair work should only be carried out by a qualified customer service.
Maintenance/repair is required if the device has been damaged (e.g. the mains adapter) if liquid has
entered the device, if objects have entered the device, if the device has been exposed to rain or mois-
ture, when it stops working properly or has fallen down.
12. Spare Parts
– If replacement parts are required, make sure that the customer service technician uses spare parts
specified by the manufacturer or that have the same characteristics as the original parts. Unauthor-
ised parts may cause fire, electric shock or other accidents.
13. Safety test
– After completing service or repair of this device, ask the customer service technician to perform a
safety test to determine if the equipment is in good working order.
14. Heat
– Do not install the device near hot surfaces, such as radiators, fan heaters, stoves or other devices
(including amplifiers) that can be hot. Never place objects with open flame, such as candles or lan-
terns, on or near the device. The installed batteries should not be exposed to excessive heat such as
direct sunlight, fire or the like.
15. Batteries
– If you do not use the radio for a month or more, remove the batteries from the battery compart-
ment to prevent it from leaking. Immediately dispose of leaking batteries properly and observe all
legal regulations. Leaking batteries can cause injury and damage the device. Never mix batteries of
different types or old and new batteries.
To minimize the risk of electric shock, fire, etc.
- do not remove screws, covers or body parts.
- the power button does not completely disconnect the power supply in any position.
To completely disconnect the device from the mains, unplug the mains adapter from the socket and
remove any inserted batteries.
4