Further Functions; Memory Function; Automatic Switch-Off - Klarstein 10034674 Mode D'emploi

EN
24

FURTHER FUNCTIONS

Automatic display switch-off
If you switch on the unit but do not operate it for more than 40 seconds, all displays will
go out. The display can be reactivated by pressing any button (except the ON/OFF
button).

Memory function

The product has a memory function. As long as the device is switched off but still
connected to the mains, it stores the current operating status. When the device is
switched on again, it operates in the stored operating state.

Automatic switch-off

If no operation is carried out for more than 15 hours when the program is started in the
switched-on state, the device is automatically switched off.
Height adjustment
Turn the height adjustment knob counterclockwise. Then pull the top tube out of the
bottom tube as far as it will go. Tighten the height adjustment knob clockwise.
Adjusting the tilt
If you want the wind to blow up or down,
slightly lift or push down the grille.
Remote control
This product is equipped with an infrared remote control. The function of the buttons on
the remote control is the same as on the device.
This remote control is a universal remote control suitable for different types of fans. The
button functions that are not applicable to this model are not discussed here.