Klarstein 10034674 Mode D'emploi page 23

Setting the switch-on timer
In standby mode, press the TIMER/PRESET button repeatedly and the timer icon will
start flashing. Use the [+] and [-] buttons to set the power on timer time from 0.5-12
hours. Press and hold the buttons to set the time faster. When you have set the desired
time, press the TIMER/PRESET button again to confirm the setting.
Note: If you do not press any button for more than 5 seconds during timer setting, the
timer will be disabled.
When the timer is on, press and hold the TIMER/PRESET button for at least 2 seconds to
deactivate the timer. The timer icon will go out.
Once the timer has expired, the unit will start automatically.
Setting the Off Timer
Press the TIMER/PRESET button repeatedly when the power is on and the timer icon
will start flashing. Use the [+] and [-] buttons to set the time for the off timer from 0.5-12
hours. Press and hold the buttons to set the time faster. When you have set the desired
time, press the TIMER/PRESET button again to confirm the setting. The display will show
the set time.
Note: If you do not press any button for more than 5 seconds during timer setting, the
timer will be deactivated.
When the timer is on, press and hold the TIMER/PRESET button for at least 2 seconds to
deactivate the timer. The timer icon will go out.
Once the timer has expired, the unit will automatically turn off.
Activating the oscillation function
When the power is on, press the OSC button to turn the oscillation function on and off.
EN
23